17
A
B
C
D
G
B
SEAT DEPTH
ADJUSTMENT
Release the gas spring on the back of the chair by
activating the right handle on the push brace.
Pull the seat all the way back to obtain the correct
starting position for seat depth adjustment.
The seat can be adjusted up to 10 cm in depth.
Follow the directions below for correct adjust-
ment.
1) Tip the chair backwards so that the wooden seat
plate beneath the chair is accessible. Remove
the leg rests to get a better view.
2) Remove the screws (A) and (B) by using the
enclosed 5 mm Allen key.
3) Move the wooden plate into the required
position. The pre-drilled holes in the wooden
plate have an interval of 5 cm.
4) Replace and tighten the screws (A) and (B).
5) Loosen the screws (C) and (D) on each side
of the chair to move the rails forward/back-
ward.
6) Tighten the screws (C) and (D) in the required
position.
Do not activate the handle for seat angling
during the above adjustment.
The bar on the back must be adjusted to
the same position on both sides.
GB