2M Sloopy 2000 Sailplane
Join our FREE Membership and accept 10%off Offer!
R2hobbies.com
7.
Glue the Carbon Fiber V-Strip onto the V-Tail. Please note that the Adjusting Pin should be fixed on Tail
Wing Front Edge.
Combining Fuselage & Tail Wing
1.
Place the V-Tail onto Fuselage Tail Part. Mark the Fuselage Tail Hole Location and drill a hole on the
V-Tail
2.
Fixing the V-Tail onto the Fuselage by Screw.
Constructing Elevator
1.
Insert the Servo Push Rod out of the Fuselage Tail.
2.
Make Sure the Servo Arm location and install the Servo Horn onto the Elevator.
