background image

 

 

 

 

6 – Components assembly and  tractor coupling  

(*note mod. hi)

 

 

 

 

Note: all the components that make part of the machine and that must be assembled before using it, 
have been designed  to minimize the user’s work; it is expected that the three-point linkage is 
assembled with universal screw wrenches or pneumatic wrenches; the cardan and the arms tractor 
connection are assembled manually.

 

 

 The assembly must be made on a steady surface or on an homogeneous level floor. 
During the assembly wear leather gloves and accident-prevention shoes

 

If pneumatic wrenches are used, wear the ear 
protections. 

6.1  Three-point linkage frame assembly 

 

Fig.  5 

The three-pointlinkage frame (Fig. 5 – 
Rif. A)  is supplied pre-assemled with the 
bolts and nuts pre-positioned. Assemble 
the frame to the supports(Fig. 5-Rif. B)as 
shown in figure (note: the elements that 
form the frame must be screwed to the 
external of the supports.Tighten the four 
screws frame connection three point and 
the three-point linkage screw (Fig. 5 – 
Rif. C)  to 85 Nm. 
Fit in the tractor connection arm (Fig. 5 – 
Rif. E) in the supports seats(Fig. 5 Rif – 
B); fit in the security pins. 

 

 

 
A – Three-point linkage frame 
B – Supports   
C –Three –point linkage 
D – Three-point linkage connection pin 
E –Arms linkage lifting tractor 
F -  Pignon 

6.2 Tractor hooking

 

 

Put the two parallel arms of the tractor coupling(Fig. 6 – Rif. A) in the oscillating arms (Fig. 6 – Rif. B) 
of the MILL GRADER. 
Connect the tractor three-point linkage (Fig. 7 Rif. A) adjusting the MILL GRADER in order that you 
will  get the best working position.  

 

Fig. 6 

Fig. 7 

 

Pull the chains of the lifting 
arms so that the machine 
does not oscillate across.

 

A

B

B

A

B

 

ENGLISH

7

Summary of Contents for MTZ Series





















Reviews: