R2 MT Series, Instruction And Maintenance Manual

Page: 10 / 20

10 10
ENGLISH
11 - Maintenance
(*note 8 mod. hi)
Operations to be carried out in order to maintain the machine in good working conditions:
- Before using the machine:
1. Check the clamping of the walking tractor tie-rods on the machine flange.
2. Check that the screws are tight, in particular check that the hoes screws are intact, if while
working they break, it is necessary to stop working and replace them.
- At the beginning of the working season:
1. Grease the flange using the appropriate greaser (Fig. 7 Ref. A).
2. Check the grease level in the tank using the specially provided cap (Fig. 7 – Ref. B); this
must be made when the machine has worked for several minutes.
During the maintenance operations wear protective gloves; for the
lubrification/greasing operations always wear nitrile gloves and protective glasses.
If the maintenance is made on a raised plane (for example on a workbench), always wear safety
shoes.
All the maintenance work must be performed with the walking tractor or tractor off and the key off.
After finishing the lubrification/greasing operations, clean the residual of lubricant left on the floor.
Fig. 7
A
B