R.V.R. Elettronica TX10000U-KLC, User'S & Technical Manual

Page: 23 / 248

ELETTRONICA
Rev. 2.0 14/05/2015
17
User & Technical Manual
TX20000U-KLC
Figure 5-6 Figure 5-7
5.1.6 R.F. Units menù
Information menu showing the status of the RF power amplifier modules. (Figure 5-8).
It is composed of 2 screens, one for each module, that can be scrolled using the arrow
buttons.
Menu Line Description
Fwd Measurement of the forward power of the amplifier module
Rfl Measurement of the reflected power of the amplifier module
Input Measurement of the driving power at the input of the amplifier mo -
dule
V.P.A. Measurement supply voltage of the module (generated from the
switching power supply included in each module)
Bias.V Polarization voltage of the mosfet
Temp Module temperature
Driver.I Measurement of the current absorbed by the preamplifier stage
Eff Efficiency of the amplifier module
Temp (Input) Temperature alarm
Fuse Status of the fuses of the RF module
MOS-N (1-8) Measurement of the current absorbed by the MOS N amplifier
module (each RF module contains 8 MOS modules)
RF-Enb Enabled of power distribution from part of the module
Figure 5-8
Nota: All modules RF must be in REMOTE otherwise will not see any parameters. If from
LOCAL it is passed REMOTE, will have to pass approximately 30/40 sec. before being able
to visualize the relative state.
Temp: Kdj-2 Temperature of the dummy load n°2
Power: Kdj-M Foward RF power on dummy load n°3 (big load)
Temp: Kdj-M Temperature of the dummy load n°3 (big load)