R.V.R. Elettronica TRDS 4001, User Manual

Page: 26 / 62

TRDS 4001
22 / 36 User Manual Rev. 4.0 - 23/03/01
For the planning it’s necessary to select the sended programmes type, in the
TRANSMISSION CLASS window (ex. command ENTER on VARIOUS or
NOTICES) and to select the transmission type used in the TRANSMISSION TYPE
window (ex. command ENTER on STEREO).
The on the encoder values, and/or selected, appear on the screen in a different
colour strip.
To allow the TA; TP; or M/S services, take place on the proper window and make
them working on pressing the cursor: if a "X" lights in this window, the procedure is
right.
The preselected data are revised on the encoder only on pressing the command
ENTER when is lighting the CONFIRM screen-command; they are neglected on
pressing the screen-commander ABORT.
Normally, these data are setted only for the first time.
D) P.I.N. SET - PIN
It’s used to planning the receiver to receive specificated programmes in a
preselected date and hour.
In oder to right operate, it’s necessary to ability the service; for that, take place on
the "P.I.N. On/Off" window and press the cursor; if a "X" lights in the window, the
procedure is right.
Now, it’ necessary to set the date, the hour and the minute of the service starting.
The preselected data are revised on the encoder only on pressin the command