R.V.R. Elettronica TRDS 4001, User Manual

Page: 25 / 62

TRDS 4001
21 / 36 User Manual Rev. 4.0 - 23/03/01
B) IDENTIFICATION CODE SETTING
It’s used to set or change the identification code of a broadcaster (PROGRAM
IDENTIFICATION CODE - PI) which has to be univocal into the broadcaster
covering area. It’s depends from the country of the braodcaster and from the same
broadcaster covering areas. The menu shows as follows:
For the planning it’s necessary to select the country in the COUNTRY SELECT window
(ex. ENTER command on I, JOR), to select the covering area on the window AREA
SELCET (ex. RETURN command on LOCAL or NATIONAL) and the code (number
from 1 to 255).
The on the encoder values and/or selected are pointed out on the screen in a different
coulor strip.
The preselected data are revised on the encoder only pressing ENTER when the
cursor is placed on the screen-command (lighted one) CONFIRM; they are neglected
on pressing the screen-command ABORT.
Normally, these data are setted only for the first time.
C) TRANSMISSION MODE SET
It’s used to set or change the by the broadcaster sended programmes type, the
used transmission type and to allow the TP services (Traffic-Programmes
Identification), TA (Traffic-Announcement Identification), M/S (Music/Speech
Switch).
The setting menu shows as follows: