R.V.R. Elettronica TLC300, User Manual

Page: 35 / 103

TLC300
31 / 42 User Manual Rev. 1.0 - 07/04/03
9. Card settings
9.1 Setting of the card internal address
A unique address must be assigned to each card, whether relay control or telemetry,
which characterizes it and makes it unique for the CPU. Therefore insert a jumper on
each of the JP2 and JP3 connectors in the position indicated in the table below.
Address jumper on JP2 jumper on JP3 Board type
1 1-2 1-2 Base Telemetry
2 3-4 3-4 Base Telemetry
3 5-6 5-6 Telemetry
4 7-8 7-8 Telemetry
5 9-10 9-10 Telemetry
6 11-12 11-12 Telemetry
7 13-14 13-14 Relais command
8 15-16 15-16 Relais command
Keep in mind that:
• a fixed address interval is assigned to every type of card;
• addresses 1 and 2 are reserved to standard telemetry cards No. 1 and No. 2,
respectively;
• address 7 is reserved to the relay control card;
• always assign the lowest free address for each type.
CN2
CN3
JP11
CN6
CN4
CN5
JP10
JP9
JP8
2 1
JP2
D6 D7 D8 D9 D1 D2 D3
1 2
JP3
D5
2 1
2 1
2 1
2 1