R.V.R. Elettronica TEX20-NV, Technical Manual

Page: 25 / 110

TEX20-NV Technical and Maintenance Manual
R.V.R. Elettronica S.r.l. (Bo) Pag. 25
2B)
1 PLUG Mains voltage plug
2 FUSE BLOCK Fuse block and line voltage selector.
Use a small screwdriver to change the
fuse or the line voltage. Rotate the
block and position it for the desired voltage.
3 INTERLOCK BNC connector. Connecting the central
conductor to ground will cause the RF
output power level to drop to zero and to
stay there until the short is removed.
When used with an R.V.R. amplifier, this
connector should be connected to the
"REMOTE" output of the power amplifier.
4 EXT. +24V (Optional) External power supply inputs at +24V
5 FAN Fan-assisted cooling for the power stage
and the power supply.
6 R.F. OUTPUT "N-type" connector, 50 Ohm
7 R.F. TEST POINT -30 dB output referred to the output
power level (on request)
8 EXT REF IN External 1KHz reference
9 MPX LEVEL Trimmer for the adjustment of MPX input
level
10 MPX INPUT MPX input connector, BNC type
11 SCA 3 LEVEL Trimmer for the adjustment of SCA 3
input level
12 SCA 3 INPUT BNC connector, unbalanced SCA 3 input or
pilot output for internally selectable
RDS encoder
13 SCA 2 LEVEL Trimmer for the adjustment of SCA 2
input level
14 SCA 2 INPUT BNC connector, unbalanced SCA 2 input or
pilot output for internally selectable