background image

10

 

32

User Manual

Rev. 1.0 - 01/02/22

ELETTRONICA

/TLW-TFT-E-2HE, /TLW-TFT-E-3HE & /TLW-TFT-E-4HE

  1.3.5  Mail Menu - Operator & Administrator

      

Note : 

Access to this menu and modification of these parameters are only possible 

after login with operator or administrator rights. 

This page not only shows to the user the alarms related to the exciter connected 

to 

/TLW-TFT-E-2HE, /TLW-TFT-E-3HE & /TLW-TFT-E-4HE 

interface, but also 

allows you to set several parameters.

Below will be described only items that allow the modification of the parameter, 

with respect to the Info menu. Press the buttons to confirm your choice, or wait at 

the time-out, the parameter will be set to the previous one:

Menu 7

Firmware Release

 

 

Shows the firmware release of TEX-TFT.

Firmware Date

   

Shows the firmware date of issue of TEX-TFT.

Conf. Tab

   

Shows the Configuration Table loaded on TEX-TFT.

WEB GUI Release

 

 

Shows the release of WEB firmware.

WEB GUI Date

 

 

Shows the date of issue of WEB firmware.

Local Date

  

Shows the date set of the internet navigation device.

Local Time

  

Shows the time set of the internet navigation device.

Device Date

 

 

Shows the date set on the TEX-TFT machine. 

Summary of Contents for TEX-TFT Series









































Reviews: