HC3
15 / 28
User Manual
Rev. 1.0L - 16/05/01
The function of this menu is essentially a help for the technician to identify the
causes of possible malfunctions of the transmitter.
5.3.6
Various menu
Two operations can be performed using this menu:
•
Setup the address of the I
2
C serial bus type connection
•
Setup the kind of visualitation in the default menu
The default address of I
2
C communication is relevant when the coupler is connected
with other RVR’ devices that use this protocol. We raccomend not to change this
parameter if not necessary.
The visualitation mode can be Digital (the default mode described in chapter 5.3)
or Analog:
In analog mode, a little triangle indicates the reflected power level set in the threshold
set menu (under RflWar), while the bar below shows the in real time level reflected
power.
This last kind of visualitation is best used when the combiner output is connected
to a device that has to be tuned, as a cavity.
