SCML1+1SL ( /V1, /V2 , /V3 & /V4 )
15
/ 30
User Manual
Rev. 2.0 - 17/02/17
ELETTRONICA
5.2.1 General Setting
TX1 : ON
TX2 : OFF
Change: Normal
Func. : AUTO
Mode : REMOTE
Reset : OK
IIC : 10
Exit
TX1
Enables (ON) or disables (OFF) the first transmitter.
TX2
Enables (ON) or disables (OFF) the second transmitter.
Change
Forces the transmitter changeover
Func.
Selects the automatic or manual changeover.
Mode
Enables (REMOTE) or disables (LOCAL) the management from external
commands
Reset
Sets at zero the retry counter retraining the changeover
IIC
Specifies the slave address of the equipment on IIC
5.2.2 TX1 Setting and TX2 Setting
PgMode: Analog
PowerG: Present
Power : Off
Status: Local
Exit
PgMode
Identifies the modality of the power good state that can be selected
from the voices: “Analog”, “Digital”, “AnlAud”, “DigAud”.
PowerG
Identifies the power good state related to the transmitter filtered from
firmware.
Power
Command to power on or to power off the equipment.
Status
Shows the status (LOCAL or REMOTE) f the equipment.
