R.V.R. Electronica RX1-NV LCD, User Manual

Page: 28 / 132

RX1-NV LCD
24 / 32
USER MANUAL Rev. 1.2 - 13/12/01
7.5.3 Stereo Alarm
Stereo operation alarm setting. When this alarm is activated, the receiver will
monitor the level of the pilot tone component in the demodulated signal, and an
alarm situation will be signalled depending on the parameters set in this menu
Figure 7-9
Lev.Min
minimum modulation level in kHz due to the pilot tone under wich the
stereo alarm wil be raised
Lev.Max
modulation level in kHz due to the pilot tone above wich the stereo
alarm will be cancelled
Interv
delay for the alarm to be raised (the pilot tone level has to remain below
the set level during the time defined by this variable before the situation
being interpreted as alarm)
Recover
delay for the alarm to be cancelled (the pilot tone level has to remain
above the set level during the time defined by this variable before the
alarm situation being cancelled)
Rescue activates or deactivates the alarm. When the alarm is deactivated, the
receiver will not signal pilot tone level related alarms
7.5.4 RDS Alarm
Setting of the alarms related to the correctness of the received RDS data.
This submenu is not active if the RDS decoder board is not installed.
7.6 Meter
This menu is used to visualize the measurements of a series of parameters related
to the received signal.
Figure 7-10