4
/ 8
User Manual
Rev. 1.2 - 10/07/15
AUD2MP1
ELETTRONICA
The outputs of this section are calibrated to be connected to outputs with a typical
impedance of 10KOhm. The insertion loss of the two outputs is typically of 6dB.
The distributor
AUD2MP1
does not require any routine maintenance.
The
AUD2MP1
audio distributor comes in different configurations summarized
below:
• Version
V1
: 2-Way passive audio splitter, digital(AES-EBU)/MPX/Analog(L&R)
stereo or mono.
• Version
V2
: 2-Way passive audio splitter, digital(AES-EBU)/MPX+RDS/
Analog(L&R) stereo or mono.
• Version
V3
: 2-Way passive audio splitter, digital(AES-EBU)/MPX+RDS+SCA1/
Analog(L&R) stereo or mono.
• Version
V4
: 2-Way passive audio splitter, digital(AES-EBU)/
MPX+RDS+SCA1+SCA2/Analog(L&R) stereo or mono.
4.3 Rear Panel Description
OUT2
OUT1
IN
MPX
OUT1
OUT2
SCA1
IN
ADJ
SCA2
OUT2
IN
OUT1
IN
OUT2
AES-EBU
OUT1
OUT R2
MONO R
MONO L
OUT R1
ADJ
OUT L2
ADJ
OUT L1
ADJ
IN R
IN L
OUT2
OUT1
IN
RDS
Figure 4.1 - AUD2MP1/V4 configuration L&R, MONO, MPX , AES/EBU, SCA1, SCA2, RDS
[1] AES-EBU IN
XLR female connector, balanced AES/EBU digital audio
input.
[2] AES-EBU OUT 1
XLR male connector, balanced AES/EBU digital audio
output 1.
[3] AES-EBU OUT 2
XLR male connector, balanced AES/EBU digital audio
output 2.
[4] SCA2 IN
BNC female connector, unbalanced SCA2 analog input (not
available on
AUD2MP1/V1
,
AUD2MP1/V2
and
AUD2MP1/
V3
).
[5] SCA2 OUT 1
BNC female connector, unbalanced SCA2 analog output
1 (not available on
AUD2MP1/V1
,
AUD2MP1/V2
and
AUD2MP1/V3
).
[6] SCA2 OUT 2
BNC female connector, unbalanced SCA2 analog output
2 (not available on
AUD2MP1/V1
,
AUD2MP1/V2
and
AUD2MP1/V3
).
