10
Connections for TIG (GTAW) Welding
Fig 2
1.
Negative power connector -
Connect Tig Torch Dinze to power connector by inserting and twisting until tight
ENSURE TIG TORCH IS FITTED TO NEGATIVE CONNECTOR OTHERWISE YOU WILL
EXPERIENCE TUNGSTEN BURNBACK
2.
Gas outlet - Quick release type
Connect the torch gas hose
3.
Positive power con
Connect the earth lead to by inserting and twisting until tight and the earth clamp to
work/bench
4.
Torch control socket 7-Pin
Connect torch control plug
To avoid a High Frequency shock keep the Tig torch in good condition and replace if any of the
insulation is damaged.
Connect the gas input hose to gas regulator and u
se ‘Pure Argon’ Gas, available from local
suppliers. Set gas flow/pressure to 8-12 LPM. Make sure gas bottle is secured to avoid injury.
Remote Foot Pedal connection.
Disconnect Tig Torch switch plug from torch control socket (Fig2.4) and connect plug from foot
pedal.