14
9. Blow back when cutting, If you experience blow back and the metal is not cut all the way through, you
either are traveling too fast or you need to increase the cutting amperage
10. Cutting arc is erratic and work is being cut all way through. You are traveling too slow or cutting with too
high amperage for work.
11. It can take a while to get used to plasma cutting if never done before. Experiment with settings on some
scrap material until you find the best amperage / cutting speed.
12. If you ever have any questions on settings call us and speak to one of our experienced technicians who will
be happy to help you on 01452 733933
