Version 29.01.2020
HW: CAM (V97)/ (V52)GD
RL3-MBN51
P
a
g
e
9
2.3.
Connections to Head Unit
Remove Comand Head-Unit.
2.3.1.
Picture signal cable
Connect the female 4+2pin HSD connector of the 4pin HSD LVDS cable to the male
4+2pin HSD LVDS connector of the interface-box.
Remove the blue female 4pin HSD connector from the rear of the factory monitor
and connect it to the male 4pin HSD LVDS connector of the 4pin HSD LVDS cable.
Connect female 4pin connector of the 4pin HSD LVDS cable to the male 4pin HSD
LVDS connector of Head-Unit.
Note: If the HSD image cable of the vehicle harness is too short for the installation, an HSD
extension can be ordered separately with item number CAB-HSD-ML100.
