Page 9
SECTION 5: Tool Requirements
Spanners:
1/4“ BSW
Legrest Clamp
See Section 8 2-8mm
A/F Spanners
Parking Brake
See Section 9 2-
10mm A/F Spanners
Braces & Links
See Section 20 1-
24mm AF Spanner
Castors
See Section 12
1-35mm AF Spanner
Power Drive System
See Section 20 2-
7/16inch A/F Spanners
Backrest
1-4mm A/F Hex Key
Locking Brace
See Section 11
No2-Pozidrive Screwdriver
Upholstery
See Section 6 Avdel
Nutsert Rivet Tool
Upholstery
See Section 6 Loctite Thread
Locking
Castors & Wheels
See Section 12/13
Compound Grade 241
Terminal Crimp Tool
Power Drive System
See Section 13
to suit 0.5 mm to 6.0 mm crimps
Torque Wrench:
Minimum Operating Range
8 lbs/ft (11 Nm)
General
Small Needle Nose Pliers
General Light / Soft
Head Hammer
General Light Oil, e.g.
3 in 1
General Wire cutter
General Power
Drill and 6 mm Bit
General
1/4“
Receptacle wire crimp tool
General
Snap Rivet tool
General
P&G PP1b programmer & diagnostics device
See Section 15
Control Dynamics programmer & diagnostics device
See Section 15
Advised:
Watt/Minute meter (Current Draw)
