background image

      
______________________________________________________________________________________________ 
           
         Issue_A  June 2012                                                            10                                                      Dash X 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Make  sure  that  the  front  end  of  the  chair  is 
lowered  slowly  to  the  floor,  and  that  the 
castors are pointing to the rear. 

 
 

Fig 6

 

– Going down a kerb 

 

      Finish position

 

 

 

 

 

 

 

 

Castors  with  small 
wheels  are  more 
liable  to  dig  in, 
than  large  wheels, 
and  require  extra 
care in use. 

 
 
 

6.5 

KERBS   

 

 

 

 

 

Negotiating a kerb. 

The  methods  described  here  involve  an  attendant 
controlling the operation.   

 

 

Going down a kerb: 

The  chair  castors  should  be  taken  to  the  edge  of  the 
kerb.  The  pusher  should  hold  the  chair  handles  firmly, 
pressing  down  on  the  tipping  lever  and  at  the  same 
time tilting the chair back. 

See fig 5 & 6.

  

 
The  rear  wheels  can  then  be  taken  to  the  kerb  edge 
and the foot removed from the tipping lever.  The chair 
is  then  lowered  down  the  kerb  on  its  rear  wheels,  with 
the castor wheels facing rearwards, 

this prevents them 

jamming  up  momentarily  as  the  chair  starts  to  move

before  pivoting  the  chair  gently  to  the  ground,  to  face 
direction of travel and then pushing forward.  
 
 
 

 

Note:

 

The  chair  must  not  be  tipped  for   

ward  or  the  occupant  may  fall  out. 
When  stabilisers  have  been  fitted,  this 
operation  is  more  difficult  to  control, 
and extra care should be taken. 

 
 

Going up a kerb. First method. 

The  chair  footplates,  or  occupant  feet  if  longer, 
should  be  taken  to  just  in  front  of  the  kerb  edge. 
The  pusher  should  hold  the  chair  handles  firmly, 
pressing  down on the tipping lever,  tilting the chair 
backwards  using  body  weight  leverage,  bringing 
chair forward till the back wheels touch the kerb. 
 
The front castors wheels can then be lowered down 
onto  the  path,  making  sure  that  the  wheels  are 
facing rearwards. With the push handles held firmly 
the attendant should now lift and push the chair. 

Going up a kerb. Second method

The chair should  be  turned round so that the  back 
wheels  are  against  the  kerb  and  the  attendant 
should  hold  the  pushing  handles  firmly  and  tip  the 
chair backwards. 
 
Using  body  weight  as  leverage  the  attendant 
should  then  pull  the  chair  off  the kerb  and  up  onto 
the  pavement,  making  sure,  as  above  that  the 
castor wheels are facing rearwards. 

The chair may then be pivoted to face the direction 
of travel and pushed forward. 

 
 

Fig 7

 

– Going down/up a flight of steps

 

 

Summary of Contents for Dash X



















Reviews: