background image

R Healthcare Technical Information Manual - Dash                                                                            November 2013 Revision B

 

                                                                                                                                                         

 

2.0   Packing and Handling 

 

Packing, Handling and identification. 

For protection during transit your manual wheelchair

 

is packed in a polythene bag, or a cardboard 

carton  when  requested,  together  with  the  User  Guidance  Information.  The  packaged  manual 
wheelchair contents weigh approximately 20 Kg. Care should always be taken when handling.  
 
Each wheelchair has its own specific identification code (serial number), which is on a label at the 
back  of  the  chair  and  on  the  outside  on  any  packaging.  This  code  should  also  be  noted  on  the 
Wheelchair  Service  Record  included  in  the  information  package  supplied  with  the  product.  Take 
care that all information supplied is kept in a safe place for your future reference, with the Service 
Record available for the Approved Distributor to endorse at the recommended service interval. 
Other cautionary information labels secured to the wheelchair are reminders for the user, not to be 
removed without reference to the Approved Distributor. 
 
Packaging should be disposed of carefully and safely after initial period of use. 

 
3.0  Tie Down Points 
 

    

 

 

 

 

 

 

 

4.0  Clinical Assessment & Service Check Recommendations 

 
The Dash series is a manual wheelchair and is intended to meet the needs of a clinical assessment. 
The tubular folding Aluminium frame, is available in various sizes and build configurations to meet 
the assessed needs of the user.

  

All versions of the Dash Lite and Dash Life wheelchair have transportation tie down points. 
 
Please refer to user suitability guide for further guidance. 
 

 

 

Only identified tie down 

points should be used. 

Summary of Contents for Dash Series





















































Reviews: