47
EN
MICR
O
W
A
VE O
VEN
n. Press the
MEMORY button to save the program using the
preselected button or press
START to start the program (and save the program with
the preselected button).
- If you want to use the power level “
PL 10
” in one or both phases, steps “c” - “d” and/or steps
“h” - “i” are not necessary.
- The saved programs are kept in the memory even if the power is disconnected.
o. To change a stored program, repeat the procedure described above.
7. X2 mode - double quantity
a. With this mode, it is easy to increase the cooking time of the preselected program for
certain baking needs.
b. In standby mode, press the
X2
button, “
2
” will appear on the display.
c. Press the number button (from
0 to 9 ) to set the required cooking time. The preselected
cycle time will double. The oven will start cooking.
d. Each time the
START button is pressed increases the time by 30 seconds (up to a
maximum of 30 minutes).
Programming example
If the first cooking phase in the program you want to use (for example no. “4”) lasts
3 min. and 20 seconds (with 80% power) and the second phase lasts 5 minutes
and 30 seconds (with 90% power),....
.... if the
X2
button and then the
4 button are pressed, the oven will start
for 6 minutes and 40 seconds (for the first phase with 80% power) and will then
perform the second phase for 11 minutes (with 90% power).
- If when selecting the “X2” function you press a program time whose total cycle time exceeds
the permitted maximum, the oven will not start and a “beep” will indicate the error.
8. X3 mode - triple quantity
a. this mode functions exactly like the one described above with the only difference that
the cooking time of the preselected program will be tripled.
b. In standby mode, press the
X3
button, “
3
” will appear on the display.
c. Proceed as described in steps “c” and “d” for the previous function.
Summary of Contents for FD1025
Page 2: ......
