VL48HDS Optional Heat Distribution System
-Option
*Requires ZDV5FP6 Flex Pipe Kit (Contains 4 pcs. 5”diameter flex pipe 6’ long).
Plenum
Adapter Plate
Required
Minimum
84 Sq. In.
Free Air
Top of
Chase
Front
Front
Secondary Vent Opening Option
Heated Room Air flows into room with fireplace and an area that
is common to the main room.
Connect only the
two inside flex pipes
.
Flex
Piping
Uses Kingsman VL48EG Grill
Or
Minimum 151 Sq. In. Free Air Equivalent
Uses Kingsman
VL48EG Grill
Or
Minimum 151
Sq. In. Free Air
Equivalent
2” MAX
From top
of Chase
Required
Minimum
84 Sq. In.
Free Air
Required
Minimum 84
Sq. In. Free Air Opening
Must be installed before front
framing is in place.
Connect only the two center pipes
when venting to an
optional
secondary vent opening
.
Single Room Option
Heated Room Air flows back into room with fireplace.
Connect
all four
flex pipes.
Ceiling
Uses Kingsman
VL48EG Grill
Or
Minimum 151
Sq. In. Free Air
Equivalent
Ceiling
2” MAX
From top
of Chase
Optional
Secondary Vent
Opening
Uses Kingsman
VL48EG Grill
Or
Minimum 151 Sq.
In. Free Air
Equivalent
⚠
If using insulation in vented chase (i.e. for outside wall), wall board / drywall is required to support all
insulation. Vented chase must be clean and free of all debris (i.e. loose insulation, pieces of wood, etc.).
Top of Chase
Secondary Vent Opening Must Be In
the Same Pressure Zone
(Room / Area)
2” MAX
From top
of Chase
Optional VL48AVP Shown
Optional VL48AVP Shown
Optional VL48AVP
Shown
17
Summary of Contents for Kingsman Marquis MQVL48N
Page 55: ...Gas Conversion for Modulator PART C 55...
Page 67: ...Proflame 2 Remote Control 67...
Page 69: ...69...
