R-Biopharm RIDA QUICK SCAN II, User Manual

Page: 18 / 40

18
RIDA
®
QUICK SCAN II Version 2.1 | User Manual
The RIDA®QUICK SCAN II then prompts you to insert a test cassette or to confirm that a
test cassette has been inserted. Proceed as follows to insert a test cassette:
• Lightly press in the ribbed surface on the front plate of the drawer until you hear the
drawer unlock.
• Then pull out the drawer as far as the stop.
• Slots are built into the drawer to securely hold the test cassette. Place a prepared test
cassette with test strip facing up into the appropriate slot, and press the cassette down
firmly to ensure it is held securely in place.
Warning: Make sure that no excess fluid runs out of the test cassette into the
drawer. If this does happen, clean any residual fluid from the drawer before
closing it.
General safety information: If the drawer is open or will be opened for inserting
a test cassette, an image appears on the screen showing the correct orientation of
an inserted test cassette.
Fig. 9: Slightly press the front
plate of the drawer to open it