2014-09-30
Page 19 of 34
R-Biopharm AG
Using a barcode scanner to scan patient ID and/or operator information
1. Main menu
2.Test screen
3.Input menu
Start a test by tapping
.
Make sure that a RFID card is
placed on the CUBE Instrument.
The RIDA
®
CUBE SCAN displays
the type of test and number of
tests remaining on the RFID
card.
Tap
to proceed to the input
menu or
to exit to the main
menu.
Scan sample information with the
barcode scanner. It will automatically
be set as “ID” value.
Tap
to confirm the input or
to
exit to the main menu.
4. Select operator screen*
1
5. Insert cartridge and close door
On this screen an operator can
now be selected by scanning the
operator barcode and tapping
to continue.
If new information is scanned
(i.e. the operator has not been
created in the operator menu
yet) a new operator will be
created automatically.
The door opens automatically.
Insert the cartridge and close the
door. The test procedure starts
automatically.
*
1
This screen only appears if the operator input has been enabled (see 3.4 on page 16)!
How to wake the CUBE Analyser up or switch it OFF
When the Tablet PC displays the main menu, the “power safe” function dims the screen. Pressing
the Lock Switch will re-illuminate the display to its customary level of brightness.
It is not necessary to switch the Instrument off every day. Switching the Instrument off completely
can only be done by disconnecting it from the power supply.