19
BA_BM_HS-300-MIDI_EN_44-21.docx
9.4
Lifting and Lowering the Platform
Before the lift table platform is lifted, the lift table must be fixed in place by the two lockable
brakes on the two front swivel castors.
Tip:
If you want to use your lift table for a longer time at the same height position (without adjustment), you
can additionally fix it mechanically with the safety catch (see section
When adjusting the height, make sure that there are no objects between the scissor construction
under the platform and that the safety catches (
12.1) are unlocked.
Be aware of the risk of crushing hands and fingers, especially when positioning downwards.
Never reach into the scissors during height adjustment!
9.4.1
HS 300 MIDI | FH
Before adjusting the height, first secure the lift table against rolling away with the two parking brakes (
3
).
Figure 6: Foot bar and brakes
•
By actuating the foot bar (
1
) downwards, the hydraulic cylinder re-
acts and transfers the force to the scissor unit. The platform moves
upwards gradually with repeated actuation. After approx. 40 actua-
tions the complete lifting height is reached.
•
When the foot bar (
1
) is released, the movement stops and the
working platform remains in this position. In order to adjust the lift
table infinitely and exactly to the desired position, the foot bar (
1
)
can be released at any point.
•
Pulling up the foot bar (
1
) lowers the work platform for the duration
of the actuation.
9.4.2
HS 300 MIDI | AH
Before adjusting the height, first secure the lift table against rolling away with the two parking brakes (
3
).
Figure 7: Push button unit
•
The height of the table top is adjusted using the removable push-but-
ton unit (
Figure 7) which can be magnetically attached to the sup-
port frame.
•
The platform can be positioned upwards with the
button and
downwards with the
button.
•
The battery hydraulics are controlled according to the dead man's
principle, i.e. the lift table moves in the desired direction as long as
one of the two buttons is pressed. As soon as the button is released,
the table stops and remains in this position.
9.4.2.1
Accessories for the HS 300 MIDI | AH battery unit
As an alternative to the wired push button unit, a radio control for the battery hydraulics is available, which
enables completely wireless operation of the height adjustment (Art.-No. 190.151.00).
1
3
4
5
3
6
7
