7
BA_BM_HS-200_EN_43-21.docx
3.5
Accident Prevention
To avoid accidents, the following rules must be observed for operation:
Prevent unauthorized persons from gaining access to the lift table.
Keep unauthorized persons away from the danger areas.
Repeatedly inform present other persons about existing residual risks (see section
4.8 "Residual Risks").
Conduct and record regular training & instruction for persons who must be in the area of the lift table.
New employees must be trained internally to work on a lift table and this training must be documented.
It is not permitted to enter the lift table platform or to transport resp. lift persons.
3.6
General Safety Regulations
In general, the following safety regulations and obligations apply when handling the lift table:
The lift table may only be operated when it is in perfect working order.
It is prohibited to remove, modify or bypass any protective, safety or monitoring equipment.
It is forbidden to modify or alter the lift table without the written approval of the manufacturer / supplier.
Faults or damage must be reported to the operator immediately, eliminated without delay and repaired if
necessary.
Repair and maintenance work on hydraulic components (e.g. hydraulic cylinders) may only be performed
by authorized and trained personnel.
Repair and maintenance work may only be carried out if the lift table has been secured with the safety
catch beforehand (see section
Maintenance must be carried out and documented in accordance with the maintenance instructions.
For repairs, only original spare parts from the manufacturer may be used.
Only instructed, trained or qualified persons may work on the lift table.
For the operation of the lift table, the respective national safety regulations for employees as well as the
national safety and accident prevention regulations apply.
3.7
Standard Equipment
•
Uniform height adjustment even with uneven load distribution or eccentric loading.
•
Stowable in the service vehicle thanks to lightweight aluminium construction and compact design.
•
Four swivel castors for mobile use and two parking brakes on the left longitudinal side.
•
Stepless foot-operated hydraulic height adjustment up/down via foot bar.
•
High load capacity of 200 kg with a tare weight of only 30 kg.
•
Safety catch for securing during maintenance work.
•
Stable and additionally reinforced scissors.
•
Versatile and flexible use.
•
CE-compliant design.
3.8
Options and Accessories
Optionally selectable table tops can be found in chapter
12 and further accessories in chapter
