54
Adjusting the bicycle
Adjusting the bicycle
Saddle
Desired seat height
With the seat height the distance between the saddle
and pedal in the lower position is meant. The seat
height is properly adjusted when the knee is bent just
a little while you stand with your foot on the pedal (in
the lower position). Please do not hesitate to ask your
dealer for advice!
*
Attention!
If you can put your feet flat on the ground,
your saddle is too low.
Seat height adjustment
The height of the seat can be adjusted by turning the
Allen bolt in the seat clamp loose with an Allen key.
*
Attention!
The safety marks should never be visible
when the seat is adjusted in height.
Saddle position adjustment
By the saddle connection you can tilt the seat and
adjust it to front as well as to the back.
To adjust the saddle by the saddle clamp turn the
bolt(s) on the underside (or the sides) of the saddle
clamp to loosen it.
*
Attention!
Do not forget to tighten the bolts and
make sure that your seat is attached firmly again after
adjustments!
Seatpost suspension adjustment
By a seatpost with suspension you can also adjust the
suspension with an Allen bolt at the bottom of the
seatpost tube. This bolt is accesible when the seat post
is completely taken out.
