Qwic MIRA 2022, Manual

Page: 18 / 112

18 Mira
Tips
First insert the charging plug into the e-bike or battery socket before connecting the
charger the mains. Don’t forget to disconnect your charger when not in use. Disconnect
the (travel) charger from both battery and socket when the battery is full.
It is normal for any charger or battery to get warm during charging, so do not cover
them up with anything while charging.
Keep your charger clear. Unplug the power cord and clean the charger with a dry
cloth to remove dust and dirt. The charger cannot be self-repaired in case of any
defects or damages. Please contact your dealer regarding this matter.
4.4. LED indicators
On the top side of the battery, you will find a battery indicator and a status
button. When connected to the charger, the indicator displays the charging
status with a light (see charging indicator).
If no charger is connected, shortly pressing the status button will light up the
LEDs and inform you about the current state of charge. While charging the
battery the LED indicator on the travel charger (accessory) will provide the
following visual information about the state of charge (see charger indicator
(no charger connected).
Function LED status
No battery present Green
Battery fully charged Green
Battery charging Red
4. THE BATTERY
Battery charging to 20%
Battery charging to 40%
Battery fully charged
100% charge
20% charge
5% charge (red light)
4.4. LED indicators
Charging indicators:
Charging indicator (no charger connected)