WWW.DUALSIG.COM
26
(
Period
) Set the time section for common recording, The recording will start only
within the set range.
(
Record type
) Set recording type: regular, detection or alarm.
Regular
: Perform regular recording in the set time section. The video ile type is
“R”.
Detect
: Trigger the “motion detect”, “camera mask” or “video loss” signal. When
the above alarm is set as the opening recording, the “detection recording” state
is on. The video ile type is “M”.
Alarm
: This triggers the external alarm signal in the set time section. When the
above alarm is set as the opening recording, the “detection recording” state is set
to on. The video ile type is “A”.
Note
: Refer to chapter 4.3 to set corresponding alarm function.
4.2.2 Playback
Refer to chapter 3.5.2.
4.2.3 Backup
You can backup the video iles to external storage through setup.
Note
: The storage must be installed before the ile backup. If the backup is
terminated, the iles already backed up can be played back individually.
Picture 4.3 Backup
(
Detect
) Detects the storage connected with the DVR such as hard disk or
universal disk.
(
Erase
) Choose the ile to delete and click erasure to delete the ile.
(
Stop
) Stop the backup.
(
Backup
) Click backup button and the dialog box pops up. You can choose the
backup ile according to type, channel and time recorded.
WWW.DUALSIG.COM
