background image

 

© Copyright Qvis ®. All documentation rights reserved.                    

 

2  Warnings  

 

2.1 

Power  

 

  Only use the power unit provided to power the device. Check the mains voltage 

rating before plugging the power unit in.  

  Do not pull the cable to unplug the device. Grip the plug end firmly and slowly 

pull out of the monitor. 

 

2.2 

Safety precautions  

 

  Keep the device away from rain and atmospheres with a high humidity, to 

prevent risk of fire and electrocution. Do not introduce material (either solid or 
liquid) to the interior of the device. If this should accidentally occur, disconnect 
the device from the mains IMMEDIATELY and have it inspected by qualified 
personnel.  

  Never open the device. In all cases, contact the qualified personnel or authorised 

service center for repairs.  

  Keep the device away from children, to prevent accidental damage.  

  Do not touch the device with wet hands so to prevent electrical shock or 

mechanical damage.  

  Do not use the device if the external casing is damaged from a fall or impact 

from a heavy/forceful object. There is a risk of electrocution if the device is 
continued to be used when the casing has been compromised. In all cases, 
contact the qualified personnel or authorised service center for repairs. 

  It is advisable to disconnect the power wire if the monitor is not used for a certain 

time.  

 

2.3 

Installation precautions  

 

  To prevent the device from overheating, locate it in a position where there is an 

allowance of air flow through the slots in the casing. Ensure at least 5 cm of free 
space when installing inside a rack. For the same reason, do not install near 
sources of heat, such as radiators or hot air ducts. Keep away from direct 
sunlight. Do not install in areas subject to excessive dust, mechanical vibrations 
or shocks.  

  Do not arrange this device on an unstable surface, such as a unbalanced or 

slanted table. The device could fall causing injury or mechanical failures.  

  Do not install the device in a place where it could be exposed to humidity or 

water. Do not direct a jet of water onto the device: risk of fire, electrocution or 
even mechanical failure.  

  Stop using the device if water or other material should penetrate inside; risk of 

fire and electrocution. Contact the retailer or authorized installer.  

  Slots and openings in the cabinet are provided for ventilation. These openings 

Summary of Contents for LED-HDMI1906-PA
























Reviews: