© Copyright Qvis ®. All documentation rights reserved.
19
4
Quick Configuration Tool
4.1
Overview
Quick configuration tool can search current IP address and modify IP address. At the same time, you can
use it to upgrade the device.
Please note:
the tool only applies to the IP addresses in the same segment.
4.2
Operation
Double click the
‘ConfigTools.exe’ icon and you will see an interface just like the one shown as in Figure
4-1.
In the device list interface, you can view the device
’s IP address, port number, subnet mask, default
gateway, MAC address, etc.
Figure 4-1 Search interface
Select one IP address and then right click mouse, you will see an interface like the one shown in Figure 4-2.
Note:
You can set the IP address, subnet mask and gateway for the network camera & PC. The network
camera IP address and PC IP address should be in the same network segment if there is no router.
Network camera default IP address is 192.168.1.108. If there is a router, please set the corresponding
gateway and subnet mask.
The factory default user name is
admin
and password is
admin
. For security reasons, please modify your
password after you first login.
For detailed WEB operation, please refer to the Network Camera Web Operation Manual in the
resource CD.
