Copyright Qvis ®. All documentation rights reserved.
6
1 Hardware Installation and Connection
Note: All the installation and operations here should conform to your local
electric safety rules.
1.1 Check Unpacked Compact DVR
When you open the product packaging please check whether there is any visible damage to the
unit. The protective materials used for the package of the compact DVR can protect against most
accidental drops or collisions during transportation. Then you can open the box to check the
accessories. Finally you can remove the protective film of the compact DVR.
Note:
Remote control is not a standard accessory and it is not included in the accessory bag.
1.2 Device Installation
The series product supports two installation modes:
desktop/ wall-mount
. The default
installation is the desktop type. Please refer to the following figure. See Figure 1-1.
Figure 1-1
1.3 Data Cable Connection
You can refer to the following figure for cable connection. See Figure 1-2.
Please use the screwdriver to secure the data cable to the compact DVR cable socket. Please
make sure it is firmly installed into place otherwise it may result in a network connection problem
occurring. Then you can use the Ping command to test the network cable connection status. You
need to check the cable connection if the request time is out.
