Copyright Qvis ®. All documentation rights reserved.
10
The rear panel is shown as below. See Figure 1-6.
Figure 1-6
Please refer to the following sheet for front panel button information:
SN
Name
Function
1
Remote
control
signal
receive window.
It is to receive the signal from the remote
control.
2
HDD indication light
The light is on when systems is reading or
write the HDD data.
3
Power indication light
The light is on when the device is connected to
the power.
4/5
USB port
/
6
On/off button
When the device is off, press it for a long time
to boot up the device.
When the device is on press it for a long time
to shut down the device.
When the device is off, press it for a short time
to close/open the screen.
7
Network status indication
light
/
8
Power socket port
Connect to DC 12V power
9
Cable port
Video CVBS input, audio CVBS input, video
CVBS output, audio CVBS output, RJ45 port.
10
Power socket
Alarm input, alarm output, RJ-45 port, RS-232
port.
