13
VIDEO
VIDEO
VIDEO
VIDEO INPUTS
INPUTS
INPUTS
INPUTS
Press the “S-VIDEO/VIDEO” button to switch between S-Video and
composite video signals.
RGB
RGB
RGB
RGB INPUTS
INPUTS
INPUTS
INPUTS
Use the “CAM/PC1/PC2” button to switch between Camera and different
RGB signals. Each time the “CAM/PC1/PC2” button is pressed, it provides
seamless
transitions
among
different
sources
such
as
Camera,
COMPUTER (IN), and RGB (IN).
Notes: RGB OUT always outputs RGB IN signals.
PROJECTOR
PROJECTOR
PROJECTOR
PROJECTOR ON/STANDBY
ON/STANDBY
ON/STANDBY
ON/STANDBY
Press the “POWER” button to turn on the visualizer’s power and press the
“Ppw” button to turn the projector power on. To place the projector on
standby after the use, press the “Ppw” button and hold for more than 2
seconds. (Using the remote control, press the “PROJECTOR POWER”
button)
PROJECTOR
PROJECTOR
PROJECTOR
PROJECTOR INPUTS
INPUTS
INPUTS
INPUTS SELECTION
SELECTION
SELECTION
SELECTION
When the projector is connected to several input sources, use the “Pin”
button to switch between projector signal inputs. (Using the remote control,
press the “PROJECTOR INPUT” button)
IMAGE
IMAGE
IMAGE
IMAGE ROTATION
ROTATION
ROTATION
ROTATION
In order to rotate the image, press the “Rot” button once, the displayed
image will be rotated clockwise.
Continue to press the “Rot” button to
restore the image to its initial position.
IMAGE
IMAGE
IMAGE
IMAGE REVERSION
REVERSION
REVERSION
REVERSION
To display a vertically mirrored image, press the “MIRROR” button.
Press
the “MIRROR” button again to exit.
