53
15. Test Routines
There are a number of procedures available in the register which can be used to test the
hardware, reset the reports and test the transaction load by simulating transactions. The
tests are started by entering a number on the TYPE key. The following are available:
301 – PRINTER FONT TEST PROCEDURE
1. Turn Lock to P (also X or Z when allowed)
2. Enter 301 on the TYPE key
3. The register will print the version information on the receipt printer.
B: Qboot Rel. 2.00
BOOT version
F: 1-WE
Display Font Table (WE = Western Europe)
P: T2020711
Flash ROM version
C: QMP3282GB
Standard-Configuration
D: 06-LTP2342-WE
Printer driver version
RAM: 1536K
Total Memory
4. Printout of complete font table
5. Finished
302 (or 303) – ALL DISPLAY TEST PROCEDURE
1. Turn Lock to P (also X or Z when allowed)
2. Enter 302 (or 303) on the TYPE key
3. Display Test Start and all characters (0x20 to 0xFF) in all available modes are
displayed.
4. Finished
305 – VERSION PRINT PROCEDURE
1. Turn Lock to P (also X or Z when allowed)
2. Enter 305 on the TYPE key
3. The register will print the version information on the receipt printer.
B: Qboot Rel. 2.00
BOOT version
F: 1-WE
Display Font Table (WE = Western Europe)
P: T2020711
Flash ROM version
C: QMP3282GB
Standard-Configuration
D: 06-LTP2342-WE
Printer driver version
RAM: 1536K
Total Memory
306 – RE-INIT PRINTER LOGO’S
1. Turn Lock to P (also X or Z when allowed)
2. Enter 306 on the TYPE key
3. The Printer logo(‘s) will be sent to the printer controller. all available modes are
displayed.
4. Finished
