Introduction
The operation of the Quooker PRO7
The Quooker system consists of a small tank under the sink which is connected to the Nordic
single tap, the Fusion tap or the Flex tap. The tank is vacuum-insulated and is connected to the
cold water supply via an inlet combination. Inside the tank the water is heated electrically to
approx. 110°C and is kept at this temperature. When boiling water is drawn off, cold water flows into
the tank at the same time and is heated automatically. If the entire content of boiling water is used
in one go, the heating-up time is ca. 15 minutes (PRO7).
Before the water leaves the tank it is purified by the HiTAC
®
water filter (High Temperature
Activated Carbon). The Nordic single tap, the Fusion tap and the Flex tap are insulated and are
fitted with a childproof push-and-turn handle (see ‘Tips for use’ for instructions). The Nordic single
tap is also height-adjustable.
Despite all the safety features incorporated in the product, anyone using the Quooker system
must keep in mind the risks of using boiling water in general. Incorrect use can lead to injury.
Therefore always read the manual carefully before use.
Installation, maintenance and warranty
The Quooker can be installed in almost any location provided there is sufficient space for the tank
as well as a 13 amp socket, water supply and waste.
The Quooker tank must be fitted in an upright position. If the tank is to be fitted in a cabinet with
drawers, an optional bracket can be purchased to suspend the tank from the cabinet wall.
The HiTAC
®
filter should be changed once every five years. If you live in a hard water area,
lime scale will collect at the bottom of the tank and will need to be cleaned out by one of our
engineers approximately once a year depending on usage and the quality of the water in your
area. Alternatively, you can install a suitable descaling system. This system must not reduce the pH
level of the water below 7 or remove all the minerals from the water (reverse osmosis) as this can
be harmful to the tank and would void the warranty. Suitable descaling systems are also available
directly from Quooker as an optional extra.
The warranty period is two years and covers supply of parts only. It does not cover labour costs or
issues resulting from insufficient lime scale maintenance.
