QM1013-102 0.001-6 GHz Dual Channel Upconverter
User Manual
Figure 2.9:
iMPACT: FLASH Programming Properties
Right-click the FLASH device and click Program, which will open the Device Programming Properties for
the PROM. Leave Verify and Erase Before Programming both checked, and leave the After Programming
selection set to automatically load FPGA when finished (all defaults) and click ’OK’.
Figure 2.10:
iMPACT: Programming
The erase and write operations will begin and show a Configuration Operation Status bar.
Quonset Microwave
Revision 1.2.0
13
