3
Mounting Screw
Backplate
Mounting Screw
Crossbar
STEP 4:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
2016 QuoizelInc.
STEP 1:
a. Secure the crossbar to the outlet box (not included) with
outlet box screws.
b. Tighten until snug.
: Place a cloth or towel on the ground under the
work area to prevent loss of mounting hardware if
dropped.
: The tabs on the crossbar should protrude
outward.
Note
Note
STEP 3:
a. Line up holes on the backplate and mounting holes on
the folded edge of the crossbar.
b. Secure by threading mounting screws into the mounting
holes on the crossbar.
c. Thread screw into one side first. Do not fully tighten.
d. Thread screw into opposite side and tighten with
screwdriver.
e. Tighten screw from step c with screwdriver.
Crossbar
Outlet Box Screw
Outlet Box
WHITE
BLACK (OR RED) WIRE
WHITE
BLACK
FROM SUPPLY
FROM SUPPLY
FROM FIXTURE
FROM FIXTURE
STEP 2:
* Use Wire Connectors (supplied) to connect the
wires.
a) Ground Wire:
1. Wrap supply
around
on mounting bracket, no less than 2 in. from the end of
the wire. Tighten
.
2. Connect fixture
to
wire
with wire connector.
b) Supply Wire:
1. Connect the
to the
with wire connector.
2. Connect the
wire to the
with wire connector.
3. Wrap each connection with approved electrical tape
and carefully stuff all of the connected wires into the
outlet box.
ground wire
green ground screw
ground screw
ground wire
supply ground
supply white wire
white fixture
supply wire
supply black (or red)
black
fixture supply wire
GROUND WIRE
GROUND WIRE
FROM SUPPLY
FROM FIXTURE
GREEN GROUND SCREW
