Qumax VK-6082AU, User Manual

Page: 3 / 27

- 03 -
• This appliance is not a substitute for proper ventilation, regular vacuum cleaning or use of
an extractor hood or fan while cooking.
• If the wall socket used to power the appliance has poor connections, the plug of the
appliance becomes hot. Make sure you plug the appliance into a properly connected
wall socket.
•
Always place and use the appliance on a dry, stable, level and horizontal surface.
• Leave at least 40cm free space behind and on both sides of the appliance and leave at
least 40cm free space above the appliance.
• Do not place anything on top of the appliance and do not sit on the appliance.
• Do not place the appliance directly below an air conditioner to prevent condennsation
from dripping onto the appliance.
•
Make sure all filters are properly installed before you switch on the appliance.
•
Only use the original filters specially intended for this appliance. Do not use any other filters.
•
Avoid knockinng against the appliance (the air inlet and outlet in particular) with hard
objects.
• Always lift or move the appliance by the handle at the back of the appliance.
•
Do not insert your fingers or objects into the air outlet.
• Do not use the appliance when you have used indoor smoke-type insect repellents or in
places with oily residues, burning incense or chemical fumes.
•
Do not use the appliance near gas appliances, heating devices or fireplaces.
• Always unplug the appliance after use and before you clean it.
• Do not use the appliance in a room with major temperature changes, as this may cause
condensation inside the appliance.
• The appliance is only intended for household use under normal operating conditions.
• Do not use the appliance in wet surroundings or in surroundings with high ambient
temperatures, such as teh bathroom, toilet or kitchen.
Caution
• Children should be supervised to ensure that they do not play with the appliance.
• Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of
the air inlet.
•
To reduce the risk of fire or electric shock. DO NOT use the appliance with any solid-state
speed control device.
• Skin or eye damage may result from directly viewing the light produced by the lamp in this
apparatus. Always disconnect power before relamping or servicing.