Qumax VK-6082AU, User Manual

Page: 11 / 27

- 11 -
6. Replacing the UV-C bulb
The UV-C bulb is designed to last for approximately 5000 hours of
use. The UV-C indicator on the control panel will flash RED when
you use UV-C exceed 5000 hrs.
NOTE: The air purifier will continue to operate without UV-C
function when the UV-C bulb burns out.
CAUTION: Do not operate the air purifier without the protective
UV-C bulb cover.
1.
Unplug the air purifier and remove the filter. (a)
2.
Remove the cover to expose the UV-C bulb. (b)
3. Gently push from the side and rotate the UV-C bulb to
remove. (c)
4. Remove and replace the UV-C bulb. Re-install the UV-C
bulb cover, filter and base cover. (d)(e)
5. Put the plug in the wall socket and switch on the appliance
again. (f)
6. Press and hold on the button for 3 seconds, after hearing
the buzzer “Ding”, the UV-C indicator will flash 3 times and
then turn off, the reset is finished. (g)
NOTE:
You can replace the UV-C bulb ahead of time and reset
the lifetime, even if the UV-C indicator light does not flash.
WARNING: The UV-C bulb contains mercury (Hg).
WARNING:
Skin or eye damage may result from directly viewing
the light produced by the lamp in this apparatus.
CAUTION:
Unplug the power cord before servicing or replacing
the UV-C bulb.