background image

Q u i n t e z z   L o c a t o r

3                  English

INSTALLATION IN THE CAR

A.

GPS ANTENNA

GPS signals are received through the external GPS antenna. It is important to choose the best
location for it, so that the GPS signal is received loud and clear. The following elements should be
taken into consideration:

The antenna is to be placed at least 50 cm away from the QUINTEZZ LOCATOR.

The antenna is to be placed at the outside of the car for optimal reception. With diverse
cars with metal film – glass, a proper reception inside the car is impossible.

The antenna is to be placed on a metal part, so as to be able to use the incorporated
magnet.

Once the antenna is placed, the power socket of the antenna cable is to be plugged into
the ANT port.

OBSERVATION: The antenna may still move, as a result of many causes, such as blown off branches,
parking along bushes etc. As these things cannot be controlled, any guarantee on the car is out of
the question.

B.

QUINTEZZ LOCATOR

The QUINTEZZ LOCATOR is especially designed for use in the car and does not necessarily need
to be placed directly behind the windscreen (like with a radar detector or a hand-held GPS). GPS
signals are received through the external antenna.
The information display of the QUINTEZZ LOCATOR is to be clearly visible to the driver.

There are 2 possibilities to install the QUINTEZZ LOCATOR:
1. Velcro strips
When using velcro strips for mounting, the surfaces of the QUINTEZZ LOCATOR and the dashboard
must fit to one another and be clean (greaseproof).
2. Mounting clamp
The supplied mounting clamp can be used for window mounting (by means of the supplied suction
pads) or for screwing (screws and other fastening material is not supplied) onto the dashboard.
After fastening, the mounting clamp is to be secured by means of the securing button at the bottom
of the QUINTEZZ LOCATOR.

C.

POWER SUPPLY

The QUINTEZZ LOCATOR is designed to be connected to the normal electric circuit (12 Volts) of the car,
which has a negative earthing. See the manual of your car, if your are not sure about the polarity.
After installation of the GPS antenna and the QUINTEZZ LOCATOR, the power cable is to be plugged
into the POWER port.
Then you remove the cigarette lighter and insert the cigarette plug into this contact.

OPERATION OF THE QUINTEZZ LOCATOR IN THE CAR

A.

AUTOMATIC TEST

After being switched on, the QUINTEZZ LOCATOR will perform an automatic self test. If you hear
the audiotext ‘QUINTEZZ LOCATOR Self Test OK’, the test has been properly performed. If the
audiotext has been switched off, the above statement will not be heard.

B.

LOOKING FOR SATELLITES

Once the automatic test has been performed, the LOCATOR will try to contact the GPS satellites.
The display will show either 3 minuses or will indicate the status by means of the letter A followed
by the number of satellites with which connections have been realized.
As soon as a connection has been established with at least 4 satellites, the QUINTEZZ LOCATOR
is able to execute a reliable positioning, and all functions of the QUINTEZZ LOCATOR are available.
The QUINTEZZ LOCATOR will keep connected with 4 to 12 satellites. If the connection is shortly
cut (for example when passing through flyunders and tunnels) the speed indicator will show an
incorrect value for a short while.

m_QuintezzLocator_GB.pmd

07.03.2006, 17:42

3

Summary of Contents for Locator














Reviews: