Quinny Buzz Box
1. Hook the bag onto the furthest bar at the back. This shopping bag when placed
between the rear wheels has a carrying capacity of a maximum of 5 kg (Fig. 24).
- Note:
Use the storage features only as directed and do not exceed the maximum
weight limit.
4.2 Folding and unfolding
Folding
1. If you want to fold the Quinny Buzz with the pushchair seat still attached, this is
only possible when the seat is placed in the forward-facing position and the
seat-back is in the reclined position (Fig. 28).
We recommend that the pushchair
seat is always removed before you fold up the pushchair.
2. Set the brake on the Quinny Buzz.
3. Collapse the sun canopy (Fig. 25).
4. Push in the adjustment button and slide handlebar in (Fig. 26).
5. Always stand beside the front wheel. Push in the (left) “ribbed” control button.
Simultaneously slide the (right) control button with “arrows” in the direction of
the arrows with your thumb and then press this button. While keeping both
buttons pressed, pull the frame downward at an angle in the direction of the front
wheel (Fig. 27).
- Note:
If you do not press in the buttons far enough whilst folding the frame, you
will hear a snapping sound. To prevent this, you should press the button with the
arrows more firmly, before moving it forwards.
6. Push the Quinny Buzz frame as far as possible downward so that the handlebar
can be clicked into the transport hook (Fig. 28).
- Note:
The transport hook
must always be clicked into the frame for security
when the Quinny Buzz is folded up or stored! This prevents the Quinny Buzz from
unfolding itself during transport.
- Note:
Prevent your fingers from getting jammed! Do not place your fingers
between the transport hook and the frame.
If you want to fold the frame even smaller:
7. Remove the seat before you start folding the Quinny Buzz.
8. Remove the wheels if necessary.
Removing the wheels
1. Rear wheels: press the release button and pull the rear wheels out of the Quinny
Buzz frame (Fig. 29).
2. Front wheel: press the release button and pull the front fork out of the tube of the
Buzz frame (Fig. 30).
5.1 General
- Note:
engage the brake on the Quinny Buzz before placing your child in the
Quinny Buzz seat. Ensure that the safety harness is open.
1. Slide the buckle sections together and click them into the buckle so that the lap
belt and the shoulder belts are fastened to the crotch strap (Fig. 31).
5.2 Adjusting the length of the belt
The length of the belt can be adjusted in different ways to match the size of your
child.
1. Using the loop: loosen the belt pads and secure the hook to the desired height
within the loop of the Quinny Buzz seat (Fig. 32). Reattach the belt pads.
2. Using the clasps: loosen the belt pads and lengthen or shorten the belts using the
clasps (upper and/or lower) (Fig. 33). Reattach the belt pads.
3. There are D-rings for attaching an additional safety harness. The standard for this
type of harness is BS EN: 13210 / BS 6684 (Fig. 34).
5.3 Adjusting the length of the shoulder belt
The shoulder belts can be set to 2 heights (Fig. 35).
1. Loosen shoulder belt hook and remove the belt pad (Fig. 36).
2. At the top, slide the cord of the comfort seat or the XL seat out of the top edge of
the Quinny Buzz seat (Fig. 37).
3. Pass the loops of the shoulder belts through the required opening in the comfort
cushion or the XL seat (Fig. 38).
4. Replace the belt pads over the shoulder belts. Attach hooks to the loop of the
Quinny Buzz seat. Slide the belt pad up over the shoulder belt. Secure with the
press-stud (Fig. 39).
5. At the top, slide the cord of the comfort cushion or the XL seat into the top edge of
the Quinny Buzz seat (Fig. 40).
5 PLACING YOUR CHILD IN THE QUINNY BUZZ
English
English
6
7
