Quincy QSV 2200, Instruction Manual

Page: 49 / 124

Section III - Airlogic Graphic controller
Quincy Vacuum Pump-QSV Series 49
3.15 Week timer menu
Control panel
(1) Scroll keys
(2) Enter key
(3) Escape key
Menu icon, Week timer
Function

To program time-based start/stop commands for the vacuum pump

To program time-based change-over commands for the net pressure band

Four different week schemes can be programmed.

A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week in the cycle,
one of the four programmed week schemes can be chosen.
NOTICE!
In the Airlogic you can select different timers on one day.(up to 8 actions). It is however not
possible to program 2 actions at the same time. The solution: leave at least 1 minute in between 2
actions.
Example: Start Vacuum pump: 5.00 AM, Pressure setpoint 2: 5.01 AM (or later).
Procedure
Starting from the Main screen (see Main screen),

Move the cursor to the action button Menu and press the Enter key. Use the Scroll buttons to select the
Timer icon.