Quincy QPNC Series, Parts And Instruction Manual

Page: 8 / 38

6
FIGURE 5 — INSTALLATION
CONNECTION TO THE COMPRESSED AIR
SYSTEM
Fit a manual shut-off valve (1 in Figure 6) between the
machine and the compressed air system so that the dryer
may be isolated during maintenance operations. Drainage
of condensate (automatic) passes outside the machine
through a flexible tube (2) that may be inspected.
Drainage must comply with local codes.
ALL DAMAGE DUE TO THE FAILURE TO COMPLY
WITH THESE INSTRUCTIONS CANNOT BE
ATTRIBUTED TO THE MANUFACTURER AND MAY
INVALIDATE THE GUARANTEE.
FIGURE 6 — COMPRESSED AIR CONNECTION
DIMENSIONS AND TECHNICAL DATA
FIGURE 7 — DIMENSIONS
FIGURE 8 — CONNECTION
1
ATTENTION:
Dryer must be wired to
the power supply through
a fused disconnect switch
or circuit breaker in
accordance with national
and local electrical codes.
Minimum 24 in (0.6 m)
on all sides.
1 2
Type L in (mm) W in (mm) H in (mm)
QPNC 75 14.57 (370) 20.28 (515) 30.08 (764)
QPNC 100 18.11 (460) 22.64 (575) 31.06 (789)
QPNC 125 18.11 (460) 22.64 (575) 31.06 (789)
QPNC 150 22.83 (580) 23.82 (605) 35.39 (899)
QPNC 175 22.83 (580) 23.82 (605) 35.39 (899)
QPNC 200 22.83 (580) 23.82 (605) 35.39 (899)
QPNC 250 22.83 (580) 23.82 (605) 35.39 (899)
L
H
W
Type A — NPT B — NPT
QPNC 75 1 F. 1 F.
QPNC 100 1-1/2 F. 1-1/2 F.
QPNC 125 1-1/2 F. 1-1/2 F.
QPNC 150 1-1/2 F. 1-1/2 F.
QPNC 175 1-1/2 F. 1-1/2 F.
QPNC 200 1-1/2 F. 1-1/2 F.
QPNC 250 1-1/2 F. 1-1/2 F.
(A) AIR INLET
CONDENSATE
DRAINING
(B) AIR OUTLET
ELECTRICAL CABLE