Quincy QPNC Series, Parts And Instruction Manual, Page: 6 / 38

4
The removal of or tampering with the safety devices
constitutes a violation of these safety standards. Safety
devices include (see Figure 2): (1) cooling fan shield, (2)
shield and (3) earth ground.
FIGURE 2 — SAFETY DEVICES
Decals fitted on the compressor unit are part of the machine;
they have been applied for safety purposes and must not be
removed or altered for any reason (see Figure 3):
1. Spare plate Code
2. “IN”
3. “OUT”
4. Identification plate
5. Label for electrical equipment
FIGURE 3 — SAFETY DECALS
SAFETY INSTRUCTIONS
When using air compressors and compressed air
accessories, basic safety rules and precautions must
always be followed, including the following:
1. READ ALL INSTRUCTIONS FULLY.
2. WIRING & BREAKERS
Wiring, breakers and other electrical equipment
must conform to local and national electrical codes.
Do not operate this unit with damaged wiring or
after the unit or air handling parts have been
dropped or damaged in any manner. Notify
authorized service facility for examination, repair
or other adjustments.
3. USE SUITABLE PARTS & ACCESSORIES
Do not use air pressurized accessories or parts in the
air system not suitable for the maximum air pressure.
4. RELEASE AIR PRESSURE SLOWLY
Fast moving air will stir up dust and debris, which
may be harmful. Release air pressure slowly when
depressurizing your system to avoid bodily injury.
5. SECURE DRAIN LINES
Fasten drain lines to floor or drain. Pressurized air
may periodically pass through drain lines, which will
cause an unsecured line to whip and may cause
bodily injury.
This machine is not suitable for outdoor
installation.
The lubricating liquids and other discharge
fluids must not be discharged into the
environment. Polluting and hazardous
products must be disposed of by authorized
personnel.
2
1
3
1
1
2
3
4
5