QK-KEY
Installation Guide
4
Setting opening times values
A different opening time value can be set to opening via the keyboard and via the optional
bypass pushbutton.
The times values are from 1 second till 9 seconds.
Enter the programming code: if not changed is: 123456 *, the green led will blink.
now the following sequence should be entered: memory cell number 00, opening time via
keyboard (1 digit) followed by opening time via bypass pushbutton (1 digit). for verification
repeat the same sequence of memory cell number 00 opening times values. Confirm with
*
.
To finish press:
#
.
Remark: when setting the keyboard opening time, a value to the bypass pushbutton must be
set also, even if not installed.
Summery and examples
Programming option
execution
default
Entering programming code
⇒
123456 *
Changing programming code
For example: new code
777456
Enter programming code *
⇒
99-777456 99-777456 *
#
123456
Storing a new access code
For example: cell number 01
access code: 2040
Enter programming code *
⇒
01-2040 01-2040 * #
All the cells are empty
(not 0)
Canceling access code stored
in cell number 37
Enter programming code *
⇒
37-# # 37-# # * #
Setting opening time from
keyboard to 2 seconds and
from bypass pushbutton to 5
seconds
Enter programming code *
⇒
00-25 00-25 * #
3 seconds from keyboard,
3 seconds from bypass
pushbutton
operation
Opening the lock using the keyboard
Enter the access code confirm with
*
.
The lock will be open for the time value it was programmed.
Each key stroke is followed by a Beep sound, entering a false code or invalid typing is
followed by a “Beep-Beep-Beep” sound sequence
When exit the secured room press the bypass pushbutton, the lock will be open for the
programmed time value (could be set to different value than entering).
