Quidway S3000 Series Operation Manual Download Page 11

Page: 11 / 37

Operation Manual - Security
Quidway S3000 Series Ethernet Switches

Chapter 1 802.1x Configuration

1-9

server-timeout-value

: Specify how long the duration of a timeout timer of an

Authentication Server is. The value ranges from 100 to 300 in units of second.

supp-timeout

: Specify the authentication timeout timer of a Supplicant. If a Supplicant

has not responded before the specified period expires, Authenticator will resend the

authentication request.

supp-timeout-value

: Specify how long the duration of an authentication timeout timer of

a Supplicant is. The value ranges from 10 to 120 in units of second.

tx-period

: Specify the transmission timeout timer. If a Supplicant has not responded

before the specified period expires, Authenticator will resend the authentication

request.

tx-period-value

: Specify how long the duration of the transmission timeout timer is. The

value ranges from 10 to 120 in units of second.

By default, the

quiet-period-value

is 60s, the

tx-period-value

is 30s, the

supp-timeout-value

is 30s, the

server-timeout-value

is 100s .

1.2.11 Enable/Disable quiet-period Timer

You can use the following commands to enable/disable a quiet-period timer of an

Authenticator (which can be a Quidway Series Ethernet Switch). If an 802.1x user has

not passed the authentication, the Authenticator will keep quiet for a while (which is

specified by

dot1x timer quiet-period

command) before launching the authentication

again. During the quiet period, the Authenticator does not do anything related to 802.1x

authentication.

Perform the following configuration in system view.

Table 1-11

Enable/Disable a quiet-period timer

Operation Command

Enable a quiet-period timer.

dot1x quiet-period

Disable a quiet-period timer

undo dot1x quiet-period

1.3 Display and Debug 802.1x

After the above configuration, execute

display

command in any view to display the

running of the VLAN configuration, and to verify the effect of the configuration. Execute

reset

command in user view to reset 802.1x statistics information. Execute

debugging

command in user view to debug the 802.1x module.

Summary of Contents for S3000 Series






































Search results

Summary of Contents for S3000 Series

Reviews:

Related manuals for S3000 Series

Brands by name

Popular brands

Quidway S3000 Series, Operation Manual

Search results

Summary of Contents for S3000 Series

Reviews:

Related manuals for S3000 Series

Brands by name

Popular brands