3
3
3
3
Step 3
Put the Roof Cover (#J) on the assembled top frame with the help of Bungee Cords
(#M).
Step 4
Add 4 x poles (#3) to the connectors (#A
&
#B) on one side and lift the structure from
the other side.
Step 5
Finish assembling the mainframe.
a) Add the rest 4 x poles (#4) to the connectors (#A
&
#B) on the other side.
Place the hooks of the leg covers (attached to the roof cover) into a proper adjusting
hole on the poles (#3).
Layout the 6 x Ground Bars (#4) on the bottom as shown.
b)
c)
Connect the Ground Bars (#4) with the poles (#3). Attach a Foot Base (#E) to the bottom
of each pole (#3), align the ends of the Bars (#4) with their jointed holes, and finally fix
them together by inserting and tightening a Screw (#H, M6 x 50 mm) into each jointed
hole. You’ll use the 8 x Screws (#H) for the 8 joints.
d)
13
