background image

Introduction

 

xi

 

 

WHAT  IS  NOT  COVERED:    As  expressly  set  out  herein,  all  warranties  provided  by  the  manufacturers  and  distributors  of 
components, equipment, and parts (“Component Manufacturer”) on the boat are hereby assigned to the owner, to the extent 

 

permitted by the Component Manufacturer, as the owner’s sole and exclusive remedy with respect to such items.  Any 

 

assistance  by  Brunswick  Marine  in  EMEA  and/or  its  authorized  dealers  with  regard  to  component  warranties  shall  not 
constitute  an  adoption  of  the  responsibilities  of  a  component  manufacturer  with  regard  to  its  component  warranties.    This 
Limited Warranty does not apply to any Quicksilver® which has been salvaged or declared a total loss or a constructive total 
loss for any reasons not covered in this Limited Warranty.  This Limited Warranty also does not apply to the following items:

 

 

1.

 

Engines, drivetrains, controls, propellers, batteries, other equipment or accessories that carry their own individual 
warranties, or equipment and accessories which are not installed by Quicksilver®

 

2.

 

Window damage or breakage

 

3.

 

Rainwater leakage, including rainwater leakage through convertible tops

 

4.

 

Damage or deterioration of cosmetic surface finishes, including cracking, crazing, discoloration, air voids, fading or 
oxidation  of  gel  coat,  wood  finishes  (varnishes,  stains,  and  paints),  fabrics,  vinyls,  plastics,  trim  tape,  plated  or 
painted metal, stainless steel finishes, anti

-

fouling bottom paint, or zinc anodes

 

5.

 

Any Quicksilver® which has been altered or modified from Brunswick Marine in EMEA factory specifications

 

6.

 

Any Quicksilver® initially sold at retail by a party other than an authorized Brunswick Marine in EMEA dealer

 

7.

 

Any Quicksilver® which has been used for racing or military purposes, or which has been overpowered according 
to Brunswick Marine in EMEA factory specifications for such Quicksilver®

 

8.

 

Any Quicksilver® used for Commercial Purposes.  Commercial Purposes, as used herein, means a vessel with more 
than 50% usage for business or revenue

-

producing purposes.

 

9.

 

Any failure or defect caused by an accident, product abuse or misuse, failure of the owner to use, maintain, or 
store  the  Quicksilver®  as  specified  in  Brunswick  Marine  in  EMEA  owner’s  manual(s),  and  any  other  failure  to 
provide reasonable care and maintenance.

 

10.

 

Any transportation, haul out, or other expenses incurred in returning the Quicksilver® to the selling dealer or to 
the Brunswick Marine in EMEA factory for warranty service.

 

11.

 

Any  representation  or  implication  relating  to  speed,  range,  fuel  consumption  or  estimated  performance 
characteristics. 

 

12.

 

Damage,  shrinkage,  or  deterioration  of  carpet,  upholstery,  and  exterior  canvas  tops,  enclosures,  and  weather 
covers (including rainwater leakage)

 

13.

 

Any failure or defect caused by an act of nature resulting in damage, cost, or expense

 

14.

 

Any transportation

 

15.

 

Any failure or defect arising from a previous repair made by a non

-

authorized service provider

 

16.

 

Any item exceeding the expressed coverage limits specified in any Brunswick Marine in EMEA Limited Warranty

 

17.

 

Any defect or repair requiring redesign of the Quicksilver®, except pursuant to the recall provisions of the United 
States Federal Boat Safety Act of 1971, or the recall laws of any other foreign jurisdiction.

 

 

SOLE  REMEDY:    The  remedy  of  repair  or  replacement  of  parts  that  are  found  to  be  defective  in  factory  materials  or 
workmanship  covered  by  the  Limited  Warranty  shall  constitute  the  owner’s  sole  and  exclusive  remedy  against  Brunswick 
Marine in EMEA for any claims whatsoever of economic loss resulting from product failure.

 

In  keeping  with  environmental  policies  and  practices,  Brunswick  Marine  in  EMEA  reserves  the  right  to  utilize  reconditioned, 
refurbished, repaired or remanufactured products or parts in the warranty repair or replacement process.  Such products and 
parts will be comparable in function and performance to an original product or part and warranted for the remainder of the 
original warranty period.  In no event shall any repair or replacement under this Limited Warranty exceed the fair market value 
of the product as of the date of the owner’s claim.  Acceptance of any product retuned or any refund provided by Brunswick 
Marine  in  EMEA  shall  not  be  deemed  an  admission  that  the  product  is  defective.    Products  that  are  replaced  become  the 
property of Brunswick Marine in EMEA.

 

 

OTHER  LIMITATIONS:    Except  as  set  forth  herein  or  on  any  other  written  Limited  Warranties  by  Brunswick  Marine  in  EMEA, 
there are no other warranties, expressed or implied provided by Brunswick  Marine in  EMEA,  on this Quicksilver®.   All other 
warranties,  expressed  or  implied  are  expressly  excluded.    Brunswick  Marine  in  EMEA  further  disclaims  any  liability  for 
economic loss arising from claims of product failure, negligence, defective design, manufacturing defect , failure to warn  and/
or  instruct,  lack  of  seaworthiness,  and  any  other  theory  of  liability  not  expressly  covered  under  the  terms  of  this  Limited 
Warranty.

 

Any implied warranty of merchantability or fitness for a particular purpose is disclaimed.  To the extent the implied warranty 
cannot  be  disclaimed,  it  is  limited  to  the  shorter  of  one  (1)  year  from  the  date  of  delivery  to  the  first  retail  owner  or  the 
duration  of  the  respective  Limited  Warranties  stated  herein.    To  the  extent  required  by  law  and  implied  warranty  of 
merchantability  is  limited  for  the  duration  of  the  respect  Limited  Warranties  stated.    To  the  extent  allowed  by  law  neither 
Brunswick  Marine  in  EMEA,  not  the  selling  dealer  shall  have  any  responsibility  of  the loss  of  use  of  the  Quicksilver®,  loss  of 
time, inconvenience, commercial loss or consequential damages.

 

Summary of Contents for 555 Cabin


















































Reviews: