Quicksilver 2M 70CM, User Manual

Page: 53 / 62

47
Reset Menu
All Reset
All Reset resets the transceiver to all factory settings,
leaving only the DTMF dial list untouched.)
To perform an All Reset, press the key to turn the
transceiver on. When the welcome screen is displayed,
hold the M key for two seconds. The screen will
display “Menu 0/ALL RES? ". Press the M key again
and the screen will display “RESET”. Press the M key
a third time, and the screen will display “Waiting”.
When the transceiver restarts, the reset is complete.
Note: You may cancel the reset by pressing any key
other than the “M” key when the “Reset?” prompt
appears.
Function Reset
Function Reset will reset the transceiver to factory
default settings, leaving memory channels and the
DTMF list intact.
To perform a Function Reset, press the
key to turn
the transceiver on. When the welcome screen is
displayed, hold the M key for two seconds. The screen
will display “Menu 0/ALL RES? ". Use the
microphone’s
UP/Down keys, or the